Error Code & Troubleshooting

SERVICE CALL (C03FF) is the code for an inappropriate or improper model setting code on the machine. The machine model type and the model type set in circuit board are different or the machine operating system firmware is misinterpreting.…
Read More...

AR-M550/620/700 - Enter the simulation by pressing touch key # * C * than type 14, Start, 1, Start. The machine will turn off than on. If the code is still displayed you have the functional problem - the fusing motor is locked. Try to…
Read More...

When the warning light (on Start button) is just blinking on Sharp AR-6020/6023 series and you can't do copy buth you can print, then exposer is not working properly or copy board is dirty. Clean all surface in optical mirrors. That's all.…
Read More...

H5-01 is a common error code on many models on Sharp copiers. It indicates that your machine has had 5 jams in a row. It can be cleared out, but your machine likely needs some maintenance to prevent further issues. Or it might be time to…
Read More...

When the machine displays an error code "Call for servise L4-03" there is a functional problem with the machine. Sometimes the code can be cleared by turning the machine off for a minute and then powering the machine on. When powering down…
Read More...

One of the possible problems is when you put out the fuser unit with machine power swich on, you will get this error code. Other possible problem is that you don’t have enough thermal grease in fusing film or problem with connectors (check…
Read More...