Reset Guides

If your Ricoh copier displays the message “Replace Fusing Belt Unit”, it usually means that the fusing belt unit has reached its service counter limit. Even after replacing the unit, the message may still appear until the counter is reset…
Read More...

If your Ricoh Aficio MP6002SP or MP9002 displays a maintenance message related to the cleaning web, you may need to reset the counter after replacing the fusing cleaning web (teflon web). In this guide, I will show you how to reset the…
Read More...

If you are using the Brother DCP-L2640DN printer and you see a message related to the drum unit, such as “Replace Drum” or “Drum End Soon”, it doesn’t always mean that the drum needs immediate replacement. In many cases, you simply need to…
Read More...

When you replace the drum unit, you must to reset the drum counter, here is the procedure how to do this: Press the “Cancel” button. Press and hold the “Toner” icon for 5 seconds. Select ”Reset Drum” Select “YES” Your…
Read More...

If your Brother MFC-L2712 displays the "Replace the Toner" message, you can often clear it by resetting the toner counter. Follow the steps below to perform a manual reset. This does not refill toner; it only resets the page counter.…
Read More...

If your Brother DCP-1510 or DCP-1512 printer is showing the "Replace Toner" message and won't allow you to print or copy, don’t worry. Here's a quick and easy fix to reset the toner and continue printing - even if your toner is low. Brother…
Read More...

Press the menu-button, Use the arrows to browse to "machine info", press OK, Use the arrows to browse to "reset drum", Press and hold OK until the display shows ^ reset v empty Instead of using any of these options, press Start,…
Read More...

The printer shuts the drum unit down when it reaches 10,000 pages. The reset procedure will reset the drum counter back to zero, so you can keep using your drum unit after the “Replace Drum” message appears and will allow you to keep…
Read More...

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…
Read More...

Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display Drum Unit, and then press OK. Press the Up arrow key to reset the drum counter. Close the front cover of the machine.…
Read More...