drum reset

Press the menu-button, Use the arrows to browse to "machine info", press OK, Use the arrows to browse to "reset drum", Press and hold OK until the display shows ^ reset v empty Instead of using any of these options, press Start,…
Read More...

The printer shuts the drum unit down when it reaches 10,000 pages. The reset procedure will reset the drum counter back to zero, so you can keep using your drum unit after the “Replace Drum” message appears and will allow you to keep…
Read More...

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. Keep the machine powered ON. Replace the old drum unit with new one, put it into the…
Read More...

Make sure the machine is turned on. Open the front cover. Press and hold OK for about two seconds to display Drum Unit, and then press OK. Press the Up arrow key to reset the drum counter. Close the front cover of the machine.…
Read More...

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps: Make sure the machine is turned on. Press. (Settings) > All Settings > Machine Info. > Parts Life. Press and…
Read More...

Related Models: DCP-L2510D, DCP-L2512D, DCP-L2530DW, DCP-L2532DW, DCP-L2537DW, DCP-L2550DN, DCP-L2551DN, DCP-L2552DN, MFC-L2710DN, MFC-L2710DW, MFC-L2712DN, MFC-L2712DW When you replace the drum unit, you must to reset the drum counter,…
Read More...

When you replace the drum unit, you must to reset the drum counter, here is the procedure how to do this: Press the “Cancel” button. Press and hold the “Toner” icon for 5 seconds. Select ”Reset Drum” Select “YES” Your printer is…
Read More...